This cover is constructed from a long-lasting outdoor material that will protect your Villa Series oven from rain, snow, wind, and your occasional animal looking for a place to reside. This cover is custom fitted to fit around the utensil rack and the contour of your oven. It is firmly secured by snapping the cover to the hearth. Start by locating the front/back of the cover and start snapping on the center back of the hearth. Starting at the back towards the front of the oven, snap both sides first, then stretch your cover carefully and snap the remaining snaps on the front of the oven.
To remove the cover, start on the front and individually pry the snaps off.
Do NOT unsnap cover by pulling on the fabric, you’ll rip the snaps off the material. Cover works great for keeping your oven clean and ready to be used next time.
Do NOT install cover when oven is still hot. Wait at least 12 hours before installing cover. If cover is installed when oven is still hot it will melt the cover.